Če se LED elektronski zaslon uporablja na prostem, se bo soočil s številnimi izzivi. Na LED zaslon bodo vplivale hude vremenske razmere, kot so visoka temperatura, hladni val, močan veter, dež itd. Če ti vidiki ne bodo izvedeni dobro, bo o varnem delovanju zaslona nemogoče govoriti. Danes vam bo urednik Winbond Ying Optoelectronics povedal, kako namestiti elektronski zaslon LED, da preprečite puščanje vode.
LED elektronski zaslon
1 Tesnilni masi dodajte hrbtno ploščo
Many friends, in order to save trouble, do not add a backplane or sealant on the backplane when installing outdoor LED displays. Over time, the electronic components will definitely enter water, and LED displays will have problems over time. The most feared thing about electronic components is water. Once water enters the circuit, it will burn out. These problems that can be solved at hand must not be ignored.
2 je prišlo do puščanja
If the LED electronic display and the back panel are tightly integrated, a water leak must be made underneath; the so-called water leak is for water leakage. No matter how tightly the front and back of the led display are combined, there is still more or less water inside, if there is no leaking hole in the lower mouth, over time, the water will accumulate more and more. If the leaking hole is punched, the water will be If it flows away, it can have a good waterproof effect, and it is also good for prolonging the service life of the led display.
LED elektronski zaslon
3 primerna pot
Pri namestitvi LED elektronskega zaslona morate uporabiti ustrezno žico za vtični priključek. Na splošno sledite načelu velikega in ne majhnega, to pomeni, da se izračuna skupna moč LED zaslona. Uporabite malo večjo žico. Najbolje je, da ne uporabite samo ali premajhnega. To bo zlahka povzročilo pregorevanje linije, kar bo vplivalo na varno delovanje LED zaslona.
